SISTEM KONTROL KEMUDI KAPAL BERBASIS SCADA MENGGUNAKAN APLIKASIH CX PROGRAMMER DAN EASYBUILDER

Main Article Content

Bambang Laksono Aji Kunto Eko Susilo

Abstract

The development of information technology in the shipping industry has long been established. Scada-based ship rudder control system Using the cxprogrammer and easy builder applications, is a form of innovation in the shipping sector, by utilizing PLC devices. PLC will control the ship's steering gear and then connected using a network, thus forming a Scada system. The PLC will be programmed using the cxprogrammer to control the device as needed and use the easy builder as a Graphic User Interface so that the system can be used by the crew easily through graphics and animation. The purpose of this research is to make it easier for workers on the ship to monitor and control the ship's rudder drive system and operate the Steering Gear by monitoring from the platform and engine room of the ship so that their work becomes more efficient.

Downloads

Download data is not yet available.

Article Details

How to Cite
AJI, Bambang Laksono; SUSILO, Kunto Eko. SISTEM KONTROL KEMUDI KAPAL BERBASIS SCADA MENGGUNAKAN APLIKASIH CX PROGRAMMER DAN EASYBUILDER. Jurnal SAINTEKOM, [S.l.], v. 11, n. 1, p. 44-51, feb. 2021. ISSN 2503-3247. Available at: <https://stmikplk.ac.id/jurnal/index.php/saintekom/article/view/176>. Date accessed: 21 apr. 2021. doi: https://doi.org/10.33020/saintekom.v11i1.176.
Section
Articles

References

Abdurrahman, Naufal, Sapto Wiratno Satoto, and Hardi Radesha. 2015. “Kajian Pemodelan Kemudi Kapal Pengawas Tanpa Awak.” Jurnal Integrasi | 136(2): 136–42.

Alinda, Desi, and Putri Siregar. 2013. “Peranan Hmi Terhadap Pendidikan Politik Mahasiswa Fisip Usu.” Dinamika Politik 2(01): 1–6.

Damayanti, Eva. 2020. “Rancang Bangun Sistem Kontrol Dan Monitoring Proses Pengisian Air Pada Toren Dengan Interface Hmi Weintek Mt6070ih Dan Smartphone Android.” 14(3): 237–48.

Dawut. 2014. “Melalui Penggunaan Media Software Cx Programmer 9.3 Untuk Meningkatkan Kompetensi Teknik Perencanaan Pengendali Plc Pada Kompetensi Dasar (Kd) Merencana Rangkaian Aplikasi Kontrol Plc Siswa Kelas Xii Tit 2 Smkn 3 Boyolangu Tulungagung Tahun Pelajaran 2013.” : 141–53.

Eliza, Fivia, Universitas Negeri Padang, Jl Prof, And Hamka Air. 2020. “Sistem Monitoring Dan Kontrol Motor Ac Berbasis Scada.” 1(1): 15–20.

Kurniawan, Billy T, Eko B Djatmiko, And Mas Murtedjo. 2013. “Perancangan Propeler Self-Propelled Barge.” Jurnal Teknik Its 2(1).

M, Diska Ayu Dhea, Arie Indartono, And Fitri Hardiyanti. 2018. “Analisa Pengambilan Keputusan Proses Pengadaan Steering Gear Dalam Proyek Pembangunan Kapal Perintis 2000 Gt.” 1509: 159–64.

Suhanto. 2010. “Rancang Bangun Simulasi Supervisory Control And Data Acquisition ( Scada ) Main Distribution Panel ( Mdp ) Berbasis Programmable Logic Controller ( Plc ).” : 47–57.

Sujito. 2011. “Implementasi Programmable Logic Controller (Plc) Pada Pengendalian Robot Pemindah Botol Minuman Sujito.” Management Operasional: 85–91.

Sutrisno, Imam, And Edy Prasetyo Hidayat. 2018. “Aplikasi Software Intellution Untuk Simulasi Scada Pada PLC OMRON.” Seminar Master PPNS 2018 1509: 35–40.

Taufiqurrohman, Muhammad. 2008. “Rancang Bangun Prototype Alat Sistem Pengontrol Kemudi Kapal Berbasis Mikrokontroler.” : 24–32.